E0131 BREIER UWH CARBON FINS with BREIER FOOT POCKET Agrandir l'image

E0131 Palmes Hockey Carbone avec chausson BREIER

Nouveau produit

BREIER CARBON UWH FINS WITH BREIER FOOT POCKET | 60% more responsive than plastic | Blade: CARBON, Epoxy | Foot Pocket: BREIER Taylor made (Option 0)|

Plus de détails

In Stock

290,00 € TTC

  • hard (500B3C5)
  • soft (500B1C5)
  • very hard (500B4C5)
  • medium (500B2C5)

Remise sur la quantité

QuantitéRemiseVous économisez
6 16,42 € Jusqu'à 98,51 €
6 10,37 € Jusqu'à 62,21 €
6 16,42 € Jusqu'à 98,51 €
6 10,37 € Jusqu'à 62,21 €
6 16,42 € Jusqu'à 98,51 €
6 10,37 € Jusqu'à 62,21 €
6 16,42 € Jusqu'à 98,51 €
6 10,37 € Jusqu'à 62,21 €
10 26,37 € Jusqu'à 263,65 €
10 20,32 € Jusqu'à 203,15 €
10 26,37 € Jusqu'à 263,65 €
10 20,32 € Jusqu'à 203,15 €
10 26,37 € Jusqu'à 263,65 €
10 20,32 € Jusqu'à 203,15 €
10 26,37 € Jusqu'à 263,65 €
10 26,37 € Jusqu'à 263,65 €
10 20,32 € Jusqu'à 203,15 €

En savoir plus

BREIER Underwater hockey fins :

Our fins are especially designed to enhance propulsion in underwater hockey fast actions. Foil multi-layers structure can be bend, twisted in all axes with high energetic responsive abilities. The composite materials are carefully chosen in order to give swimmers 3D power propulsion fins with the perfect weight and strength to hold up the challenge of underwater game. Fully protected and approved for competition.

BLADE : CARBON
Technology : prepreg
Fabric : high-strength carbon fibre
Resin : epoxy
Performance : 60% more responsive than plastic, 20% more responsive than e-glass.
Height : 500 mm
Width : 240 mm

Hardness :
500B1C5 : soft
500B2C5 : medium
500B3C5 : hard
500B4C5 : very hard

PROTECTION :
Abrasion resistant layers of elastomer on both sides of the blade.
T profiles on the edges.

FOOT POCKET : BREIER (Option 0)
Made-to-measure : size from 35 to 50 (3 to 15) neoprene foam pad inside the foot pocket for comfort and protection. They can be used barefoot. Please consult the measurement document available here (in English) (this document is also available in French here) or follow instructions hereafter:

FOOT MEASUREMENTS

Step 1 : If you usually wear neoprene booties to play, remember to put them on before starting with the foot measurements.
Step 2 : Place a plain piece of paper on the ground flush with a wall (no skirting boards).
Step 3 : Then place your foot flat on the piece of paper with your heel against the wall.
Step 4 : Trace the shape of your foot, holding the pen upright (at 90N to the paper). Repeat for the other foot.
Step 5 : Draw a line across the top of the feet (A - across the big toes), as indicated in Figure 1: The length of the feet.
Step 6 : Measure the distance between this line (A) and the bottom of the page (B) at the heel of the foot (Figure 1).
Step 7 : Record these measurements (A-B) in the boxes below: Lenght - LEFT RIGHT
Step 8 : Keeping your neoprene booties on and your foot flat on the floor, now take a measuring tape to determine the following measurements.
Step 9 : Measure the circumference of the foot from the highest part on top of the foot (Figure 2 : C & the instep) around the hollowed out/indented part of the foot (Figure 2 : D). Repeat for the other foot.
Step 10 : Record these measurements (C & D) in the boxes below: Circumference - LEFT RIGHT

Avis

Donnez votre avis

E0131 Palmes Hockey Carbone avec chausson BREIER

E0131 Palmes Hockey Carbone avec chausson BREIER

BREIER CARBON UWH FINS WITH BREIER FOOT POCKET | 60% more responsive than plastic | Blade: CARBON, Epoxy | Foot Pocket: BREIER Taylor made (Option 0)|

Path: > > E0131 Palmes Hockey Carbone avec chausson BREIER

Téléchargement

Personnalisation

Après avoir enregistré votre personnalisation, n'oubliez pas d'ajouter le produit au panier.

Texte

loader

* champs requis